Herschel patio heater stand

Herschel Recommends

Heater Stand


Next Day Delivery
DIY Friendly
Reduce heating Cost
Highly energy efficient
1 Warranty
Zero maintenance


Make your Herschel Sunset heater portable, by using this purpose-built heater stand.  With a telescopic extension to 2.1m this stand will enable you to move your heater to exactly where you want the heat.

Herschel Sunset heaters have a built-in tilt switch which will turn the heater off if it experiences movement through 45° of vertical.

Mounting a Sunset heater on its stand:

Mounting schematic for herschel heater stand


Important to note:

  • The stand is not intended as a permanent installation;
  • Never lower the heater on the extension below 1.8m;
  • You must supply your own electrical extensions from a suitable wall socket and plug rated at 13 amps. Any extension leads must be taped or secured to the ground to avoid an accidental tripping hazard;
  • The remote control supplied with the heater should be used to control the heater. However, when using the timer function, DO NOT leave the heater on and unattended on long timer periods. Always switch the heater off when unattended;
  • Do not use the heater on the stand with any other form of automated switching mechanism.

Steel tube and base with Chrome finish;

Base weight 5 kilos;

Length with telescopic extension: 1.1m – 2.1m



There are no reviews yet.

Be the first to review “Heater Stand”

Your email address will not be published. Required fields are marked *